Home › Engine / Hybrid System › 2AZ-FE ENGINE MECHANICAL › DRIVE BELT › from 2016.05
RM24M0E _51 Engine / Hybrid System _059548 2AZ-FE ENGINE MECHANICAL _0291831 DRIVE BELT A

2AZ-FE ENGINE MECHANICAL  DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL FAN AND GENERATOR V BELT

a.
A114351E01
0.467,1.708 0.782,1.873 0.316,0.165 10 SST 0.876,1.791 1.758,1.791 false 1.65,0.953 2.142,0.186 2.142,0.186 2.26,0.186 false 2.303,0.079 3.218,0.407 0.915,0.327 10 19 mm Socket Wrench

Using SST and a 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then install the fan and generator V belt.

SST
09216-42010  

NOTICE:
·

Be sure to connect SST and the tools so that they are in line during use.

·

When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.

·

After the tensioner is fully retracted, do not apply force any more than necessary.




Hide 51217A 2.INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH

a.
A132541

Install the reinforcement RH with the 4 bolts.

Torque:
96 N*m (979 kgf*cm, 71 ft.*lbf)


Hide 53701 3.INSTALL FRONT FENDER APRON RH

Hide 51441 4.INSTALL NO. 1 ENGINE UNDER COVER

Hide 53292A 6.INSTALL UPPER RADIATOR SUPPORT SEAL