16331A
1.INSTALL THERMOSTAT
Install a new gasket to the thermostat.
Install the thermostat with the jiggle valve facing up.
The jiggle valve may be set within 10° on either side of the prescribed position.
16321
2.INSTALL WATER INLET
Install the water inlet with the 2 nuts .
16604
3.INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY
Install the idler pulley cover plate and idler pulley sub-assembly with the bolt.
16572D
4.CONNECT NO. 2 RADIATOR HOSE
Connect the No. 2 radiator hose to the engine.
16361A
5.INSTALL V-RIBBED BELT
53701
6.INSTALL FRONT FENDER APRON RH
7.INSTALL FRONT WHEEL RH
81135
8.INSTALL HEADLIGHT ASSEMBLY RH
9.ADD ENGINE COOLANT
10.INSPECT FOR COOLANT LEAK
51441
11.INSTALL NO. 1 ENGINE UNDER COVER
11209
12.INSTALL V-BANK COVER ASSEMBLY