Home › Engine / Hybrid System › 2GR-FE COOLING › COOLING FAN MOTOR
RM24M0E _51 Engine / Hybrid System _059551 2GR-FE COOLING _0291844 COOLING FAN MOTOR A

2GR-FE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363A 1.INSTALL NO. 2 COOLING FAN MOTOR

a.
A161446

Install the fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16363 2.INSTALL NO. 1 COOLING FAN MOTOR

a.
A161445

Install the fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16363 3.CONNECT COOLING FAN MOTOR CONNECTORS

a.
A161443

Connect the cooling fan motor connectors.


Hide 16361 4.INSTALL FAN

a.
A112341

Install the 2 fans with the 2 nuts.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 5. CHECK COOLING FAN MOTOR OPERATION

a.

Check the No. 1 and No. 2 cooling fan motor operation.

A394010

i.

Check that the fan rotates smoothly by hand.


ii.

Connect the battery to the fan motor connector.


iii.

Check that the fan rotates smoothly, and check the motor rotation direction.

NOTICE:

Make sure there are no malfunction noises or vibrations while the motor is rotating.


HINT:

If the positive and negative terminals of the battery are mistakenly connected to the connector in reverse, the motor will operate in the opposite direction.




Hide 16400 6.INSTALL RADIATOR ASSEMBLY