Home › Engine / Hybrid System › 2AZ-FE COOLING › RADIATOR › 2013.04–2016.05
RM24M0E _51 Engine / Hybrid System _059552 2AZ-FE COOLING _0291853 RADIATOR A

2AZ-FE COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


Hide 74404B 2.REMOVE BATTERY CLAMP SUB-ASSEMBLY

a.

Remove the bolt, nut and battery clamp.


Hide 28800 3.REMOVE BATTERY

Hide 51441 4.REMOVE NO. 1 ENGINE UNDER COVER

Hide 16571C 6.DISCONNECT NO. 1 RADIATOR HOSE

a.

Disconnect the No. 1 radiator hose from the No. 1 water by-pass pipe, engine and radiator.


Hide 16572D 7.DISCONNECT NO. 2 RADIATOR HOSE

Hide 32921 8.DISCONNECT NO. 1 OIL COOLER INLET TUBE (w/ Oil Cooler)

a.

Disconnect the oil cooler hose inlet and outlet from the radiator.


b.

Remove the 3 bolts and tube from the radiator.

A162792


Hide 81150 9.REMOVE HEADLIGHT ASSEMBLY

Hide 53209B 10.REMOVE HOOD LOCK SUPPORT BRACE SUB-ASSEMBLY

a.
A217211

Disconnect the 3 wire harness clamps from the hood lock support brace sub-assembly.


b.
A217212

Remove the 2 bolts and hood lock support brace sub-assembly.


Hide 16268 11.REMOVE NO. 1 WATER BY-PASS PIPE

a.

Detach the clamp from the radiator support.


b.

Disconnect the No. 1 water by-pass hose from the reservoir.


c.

Disconnect the No. 3 water by-pass hose from the radiator.


d.

Remove the 2 bolts and No. 1 water by-pass pipe from the upper radiator support.

A114377E03
2.021,1.427 2.021,3.333 false 3.958,0.656 3.958,3.344 false 5.302,0.573 5.302,1.896 false 5.26,1.917 5.51,2.094 0.25,0.177 10 true 1* 3.896,3.406 4.146,3.583 0.25,0.177 10 true 2* 1.979,3.385 2.229,3.563 0.25,0.177 10 true 3*

Text in Illustration
*1 No. 1 Water By-Pass Hose *2 No. 1 Water By-Pass Pipe
*3 No. 3 Water By-Pass Hose - -


Hide 12.DISCONNECT COOLING FAN MOTOR CONNECTOR

a.
A114384

Disconnect the No. 1 and No. 2 fan motor connectors.


b.

Detach the claw.


Hide 16533 13.REMOVE RADIATOR SUPPORT UPPER BRACKET

a.
A114379

Remove the 4 bolts and 2 brackets.


Hide 17751 14.REMOVE NO. 1 AIR CLEANER INLET

a.
A114380

Remove the clip and inlet.


Hide 53205 15.REMOVE RADIATOR UPPER SUPPORT SUB-ASSEMBLY

a.
A114381

Remove the ground cable's bolt from the radiator support LH side.


b.

Detach the 2 wire harness's clamps from the radiator support LH side.


c.
A114382

Remove the 4 bolts and support with wire harness.

NOTICE:

Do not excessively move the radiator upper support, as its movement is limited by the wire harness.



Hide 16712 16.REMOVE NO. 2 FAN SHROUD

a.
A114383

Remove the 2 bolts and No. 2 fan shroud.


Hide 16400 17.REMOVE RADIATOR ASSEMBLY WITH FAN SHROUD AND FAN MOTOR

a.

Detach the cooler condenser from the radiator.

HINT:

After detaching the condenser, make sure that all 4 fan shroud cushions are present.



b.
A114385

Remove the radiator with fan shroud and fan motor.


c.

Remove the 2 lower radiator support cushions.


Hide 16711 18.REMOVE FAN SHROUD WITH FAN MOTOR

a.
A114386

Remove the 2 bolts and fan shroud with fan motor from the radiator.