Home › Drivetrain › TIRE AND WHEEL › TIRE PRESSURE WARNING RECEIVER › from 2016.05
RM24M0E _52 Drivetrain _059557 TIRE AND WHEEL _0291869 TIRE PRESSURE WARNING RECEIVER A

TIRE AND WHEEL  TIRE PRESSURE WARNING RECEIVER  INSTALLATION  


PROCEDURE

Hide 89760C 1.INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:
·

Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.

·

If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.



a.
C356265

Connect the connector.


b.

Install the tire pressure warning ECU and receiver with the bolt.


Hide 64740A 2.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Hide 4.INSPECT TIRE PRESSURE WARNING SYSTEM