Home › Brake › BRAKE › BRAKE BOOSTER(for 2AZ-FE RHD)
RM24M0E _54 Brake _059558 BRAKE _0291881 BRAKE BOOSTER(for 2AZ-FE RHD) A

BRAKE  BRAKE BOOSTER(for 2AZ-FE RHD)  REMOVAL  


PROCEDURE

Hide 1.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 47201 2.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 3.DISCONNECT VACUUM HOSE

Hide 47264A 4.REMOVE PUSH ROD PIN

a.

Remove the clip from the push rod pin.


b.

Remove the push rod pin from the push rod clevis.


Hide 47264D 5.REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.

Loosen the push rod clevis lock nut.


b.

Remove the push rod clevis.


Hide 44610 6.REMOVE BRAKE BOOSTER ASSEMBLY

a.
C366268

Remove the 4 nuts.


b.

Pull out the booster with gasket.


Hide 44785 7.REMOVE BRAKE BOOSTER GASKET

Hide 44730 8.REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY

Hide 44696 9.REMOVE CHECK VALVE GROMMET