The power steering ECU receives signals from the ECM and the skid control ECU via the CAN communication system.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0100 | Lost communication with ECM/PCM "A" | ·
CAN communication system ·
ECM |
| U0129 | Lost communication with brake system control module | ·
CAN communication system ·
Skid control ECU |
Clear the DTCs (See page Steering>POWER STEERING>POWER STEERING SYSTEM>DTC CHECK / CLEAR).
Check for DTCs.
DTC is not output.
OK
NG