28800
1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
55432B
2.REMOVE INSTRUMENT PANEL FINISH PANEL LOWER
Remove the instrument panel finish panel lower (see page Vehicle Interior>INTERIOR PANEL>LOWER INSTRUMENT PANEL>REMOVAL).
89650
3.REMOVE POWER STEERING ECU
Remove the 4 ECU connectors.
Remove the bolt.
Remove the 2 bolts and ECU.
Do not drop or strike the power steering ECU. If dropped or struck, replace it with a new one.