The center airbag sensor assembly consists of the deceleration sensor, safing sensor, drive circuit, diagnosis circuit, ignition control, etc.
If the center airbag sensor assembly receives signals from the deceleration sensor, it determines whether the airbags and pretensioners should be deployed.
DTC B1000/31 is stored when a malfunction is detected in the center airbag sensor assembly.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1000/31 | Center airbag sensor assembly malfunction | Center airbag sensor assembly |
Check for DTCs (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| Only DTC B1000/31 is output | A |
| DTC B1000/31 and other DTCs are output | B |
If only DTC B1000/31 is output, do not clear the DTC, replace the center airbag sensor assembly.
If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.
A
B
(See pageVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSTIC TROUBLE CODE CHART)