Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059562 SUPPLEMENTAL RESTRAINT SYSTEMS _0291898 AIRBAG SYSTEM C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  B1665/17  Center Floor Airbag Sensor Malfunction  


DESCRIPTION

The center floor airbag sensor consists of parts including the diagnostic circuit and the lateral deceleration sensor.

When the center airbag sensor receives signals from the lateral deceleration sensor, it determines whether or not the SRS should be activated.

DTC B1665/17 is set when a malfunction is detected in the center floor airbag sensor.

DTC No. DTC Detection Condition Trouble Area
B1665/17 When one of following conditions is met:
·

Center floor airbag sensor malfunction

·

Center airbag sensor malfunction


·

Center floor airbag sensor

·

Center airbag sensor



PROCEDURE

1.CHECK CENTER FLOOR AIRBAG SENSOR
C135363E07
0.406,3.531 0.563,3.188 true 0.823,3.521 0.698,3.354 true 1.844,1.208 3.188,1.563 1.344,0.354 10 false Side Airbag Sensor RH (for Rear Side) 0.656,1.115 1.604,1.469 0.948,0.354 10 false Rear Floor Airbag Sensor 0.469,2.698 0.844,2.865 0.375,0.167 10 false DLC3 0.292,3.563 0.552,3.719 0.26,0.156 10 false CG 0.802,3.542 1.063,3.698 0.26,0.156 10 false TC 2.323,2.188 2.854,2.344 0.531,0.156 10 false DTC 17 2.271,3.281 2.802,3.438 0.531,0.156 10 false DTC 18

a.

Turn the ignition switch off.


b.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.


c.

Interchange the center floor airbag sensor with the rear floor airbag sensor and connect the connectors to them.


d.

Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.


e.

Turn the ignition switch on (IG), and wait for at least 60 seconds.



g.

Turn the ignition switch off.


h.

Turn the ignition switch on (IG), and wait for at least 60 seconds.


i.

Check the DTCs (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).

Result:
Result Proceed to
DTC B1665/17 and B1675/18 are not output. A
DTC B1665/17 is output. B
DTC B1675/18 is output. C

HINT:

DTCs other than DTC B1665/17 and B1675/18 may be output at this time, but they are not related to this check.




A

USE SIMULATION METHOD TO CHECK

B

REPLACE CENTER AIRBAG SENSOR ASSEMBLY

C

REPLACE CENTER FLOOR AIRBAG SENSOR