1.CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
Perform a diagnostic system check (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
With the driver side knee airbag installed on the vehicle, perform a visual check:
Check for cuts, cracks or discoloration on the steering pad outer surface and in the grooved portion.
If any of the defects mentioned above are present, replace the driver side knee airbag with a new one.
For removal and installation of the driver side knee airbag, be sure to follow the correct procedures.
2.CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
Perform a diagnostic system check (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
With the driver side knee airbag removed from the vehicle, perform a visual check:
Check for cuts, cracks or discoloration on the driver side knee airbag outer surface and in the grooved portion.
Check for cuts and cracks in the wire harness, and chipping on the connectors.
Check for deformation on the driver side knee airbag.
If any of the defects mentioned above are present, replace the driver side knee airbag with a new one.
For removal and installation of the driver side knee airbag, be sure to follow the correct procedures.