Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY › from 2016.05
RM24M0E _58 Vehicle Interior _059562 SUPPLEMENTAL RESTRAINT SYSTEMS _0291902 FRONT PASSENGER AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT PASSENGER AIRBAG ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).


PROCEDURE

Hide 73960A 1.INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

a.

Attach the rear side hook of the front passenger airbag to the rear side airbag door.


b.

Bend the front side hook so that it attaches to the front side airbag door.


c.
C139026

Install the 2 bolts to No. 3 heater to register duct.


Hide 3.CONNECT FRONT PASSENGER AIRBAG CONNECTOR

a.
C367468

Connect the connector to the airbag.

NOTICE:

When handling the airbag connector, do not damage the airbag wire harness.



Hide 55550 4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY