Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).
55550
1.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
2.DISCONNECT FRONT PASSENGER AIRBAG CONNECTOR
Disconnect the connector from the airbag.
When handling the airbag connector, do not damage the airbag wire harness.
3.REMOVE UPPER INSTRUMENT PANEL
73960A
4.REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
Remove the 2 bolts from the No. 3 heater to register duct.
Release the front side airbag door from the front side hook by slightly bending it and lift out the front passenger airbag rearward.
Release the rear side airbag door from the other hook and remove the front passenger airbag.