Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CURTAIN SHIELD AIRBAG ASSEMBLY
RM24M0E _58 Vehicle Interior _059562 SUPPLEMENTAL RESTRAINT SYSTEMS _0291903 CURTAIN SHIELD AIRBAG ASSEMBLY G

SUPPLEMENTAL RESTRAINT SYSTEMS  CURTAIN SHIELD AIRBAG ASSEMBLY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)


b.

With the curtain shield airbag installed on the vehicle, perform a visual check:

·

Check for cuts, cracks or discoloration on curtain shield airbag the outer surface and in the grooved portion.


If any of the defects mentioned above are present, replace the curtain shield airbag with a new one.

CAUTION:

For removal and installation of the curtain shield airbag, be sure to follow the correct procedures.



Hide 2.CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)


b.
C136834

With the curtain shield airbag removed from the vehicle, perform a visual check:

·

Check for cuts, cracks or discoloration on the curtain shield airbag outer surface and in the grooved portion.

·

Check for cuts and cracks in the wire harness, and chipping on the connectors.

·

Check for deformation on the curtain shield airbag.


If any of the defects mentioned above are present, replace the curtain shield airbag with a new one.

CAUTION:

For removal and installation procedures of the curtain shield airbag, be sure to follow the correct procedures.