1.CHECK FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
Perform a diagnostic system check (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
With the front seat side airbag installed on the vehicle, perform a visual check:
Check for cuts, minute cracks or marked discoloration on the front seat side airbag or around the front seat side airbag.
If any of the defects mentioned above are present, replace the front seat with a new one.
For removal and installation procedures of the front seat side airbag, be sure to follow the correct procedures.
2.CHECK FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
Perform a diagnostic system check (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
With the front seat side airbag removed from the vehicle, perform a visual check:
Check for cuts, cracks or discoloration on the front seat side airbag outer surface and in the grooved portion.
Check for cuts and cracks in the wire harness, and chipping on the connectors.
Check for deformation on the front seat side airbag.
If any of the defects mentioned above are present, replace the front seat with a new one.
For removal and installation procedures of the front seat side airbag, be sure to follow the correct procedures.