Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CENTER FLOOR AIRBAG SENSOR
RM24M0E _58 Vehicle Interior _059562 SUPPLEMENTAL RESTRAINT SYSTEMS _0291910 CENTER FLOOR AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  CENTER FLOOR AIRBAG SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK CENTER FLOOR AIRBAG SENSOR (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)

Hide 2.CHECK CENTER FLOOR AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)


b.

If the center floor of the vehicle or its periphery are damaged, perform a visual check:

·

Check for cracks, dents or chips in the case.

·

Check for cracks, dents, chips and scratches in the connector.

·

Check for damage to the serial number.


If any of the defects mentioned above are present, replace the center floor airbag sensor with a new one.

CAUTION:

For removal and installation procedures of the center floor airbag sensor, be sure to follow the correct procedures.



Hide 3.CHECK CENTER FLOOR AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG DEPLOYED)

a.

Replace the center floor airbag sensor.

CAUTION:
·

For removal and installation procedures of the center floor airbag sensor, be sure to follow the correct procedures.

·

If the airbags have deployed, replace the center floor airbag sensor on the side in which the collision occurred. Replace both if necessary.