1.CHECK REAR FLOOR AIRBAG SENSOR (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
Perform a diagnostic system check (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
2.CHECK REAR FLOOR AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
Perform a diagnostic system check (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
If the rear floor of the vehicle or its periphery are damaged, perform a visual check:
Check for cracks, dents or chips in the case.
Check for cracks, dents, chips and scratches in the connector.
Check for damage to the serial number.
If any of the defects mentioned above are present, replace the rear floor airbag sensor with a new one.
For removal and installation procedures of the rear floor airbag sensor, be sure to follow the correct procedures.
3.CHECK REAR FLOOR AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG DEPLOYED)
Replace the rear floor airbag sensor.
For removal and installation procedures of the rear floor airbag sensor, be sure to follow the correct procedures.
If the airbags have deployed, replace the rear floor airbag sensor on the side in which the collision occurred. Replace both if necessary.