Be sure to correctly follow the removal and installation procedures for the steering pad assembly.
45130
1.INSPECT STEERING PAD ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
Visually check for defects with the steering pad assembly installed on the vehicle.
The defects are as follows:
Cuts on the surface or in the grooves
Small cracks on the surface or in the grooves
Significant discoloration on the surface or in the grooves
No defects are found.
If any of the defects is found, replace the steering pad assembly with a new one.
45130
2.INSPECT STEERING PAD ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
Visually check for defects with the steering pad assembly removed from the vehicle.
The defects are as follows:
Cuts on the surface or in the grooves
Small cracks on the surface or in the grooves
Significant discoloration on the surface or in the grooves
Cracks or other damage to the connector
Deformation of the steering wheel assembly
Deformation of the horn button sub-assembly of the steering pad assembly
Interference or uneven clearance between the steering pad assembly and steering wheel assembly when the new steering pad assembly is installed on the steering wheel assembly
No defects are found.
If any of the defects is found, replace the steering pad assembly or steering wheel assembly with a new one.