Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › STEERING PAD(for LHD) › from 2016.05
RM24M0E _58 Vehicle Interior _059562 SUPPLEMENTAL RESTRAINT SYSTEMS _0291913 STEERING PAD(for LHD) G

SUPPLEMENTAL RESTRAINT SYSTEMS  STEERING PAD(for LHD)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK STEERING PAD ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)


b.

With the steering pad (with airbag) installed on the vehicle, perform a visual check:

·

Check for cuts, cracks or discoloration on the steering pad outer surface and in the grooved portion.


If any of the defects mentioned above are present, replace the steering pad with a new one.

CAUTION:

For removal and installation of the steering pad, be sure to follow the correct procedures.



Hide 2.CHECK STEERING PAD ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)


b.

With the steering pad (with airbag) removed from the vehicle, perform a visual check:

·

Check for cuts, cracks or discoloration on the steering pad outer surface and in the grooved portion.


·

Check for cuts and cracks in the wire harness, and chipping on the connectors.


·

Check for deformation on the steering wheel.


·
C136813E02
0.969,0.146 2.365,0.146 false 1.125,0.458 1.125,0.156 false 2.365,0.146 2.365,0.458 false 0.094,0.063 0.958,0.208 0.865,0.146 10 false Contact Plate

Check for deformation of the steering pad contact plates.


If any of the defects mentioned above are present, replace the steering pad with a new one.

CAUTION:

For removal and installation of the steering pad, be sure to follow the correct procedures.


HINT:
·

If the steering pad contact plates are deformed, never repair them. Always replace the steering pad with a new one.


·
C366993

There should be no interference between the steering pad and steering wheel, and the clearance should be uniform all the way around when the new steering pad is installed on the steering wheel.