Home › Vehicle Interior › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY › from 2016.05
RM24M0E _58 Vehicle Interior _059563 SEAT BELT _0291916 FRONT SEAT OUTER BELT ASSEMBLY N

SEAT BELT  FRONT SEAT OUTER BELT ASSEMBLY  DISPOSAL  


CAUTION / NOTICE / HINT

HINT:

When scrapping vehicles equipped with a seat belt pretensioner or disposing of a front seat outer belt (with seat belt pretensioner), always first activate the seat belt pretensioner in accordance with the procedures described below. If any abnormality occurs during activation of the seat belt pretensioner, contact the SERVICE DEPARTMENT of the DISTRIBUTOR.


CAUTION:
·
B106111E15
0.604,0.865 1.063,1.177 0.458,0.313 10 false SST


·

Never dispose of a front seat outer belt that has a non-activated pretensioner.

·

The seat belt pretensioner produces a loud, exploding sound when it activates. Perform the operation where it will not be a nuisance to nearby people.

·

When activating a front seat outer belt (with seat belt pretensioner), stand at least 10 m (33 ft.) away from the front seat outer belt.

·

Use gloves and safety glasses when handling a front seat outer belt with an activated pretensioner.

·

Always wash your hands with water after completing the disposal.

·

Do not apply water to a front seat outer belt that has an activated pretensioner.

·

Perform procedures in a place away from electrical interference.

·

When activating the seat belt pretensioner, always use the specified SST (SRS airbag deployment tool).



PROCEDURE

Hide 73210 1.DISPOSE OF FRONT SEAT OUTER BELT ASSEMBLY RH (WHEN INSTALLED IN VEHICLE)

HINT:

Prepare a battery to activate the seat belt pretensioner.


a.
B106111E15
0.604,0.865 1.063,1.177 0.458,0.313 10 false SST

Check if SST is functioning properly.

SST
09082-00700  

CAUTION:

When activating the seat belt pretensioner, always use the specified SST.


i.
B106112E01
0.225,1.238 0.555,1.439 0.330,0.201 10 SST 2.73,0.587 3.254,0.788 0.524,0.201 10 Battery

Connect SST's red clip to the battery's positive (+) terminal and the black clip to the battery's negative (-) terminal.

HINT:

Do not connect the yellow connector. The yellow connector is used to connect to the seat belt pretensioner.



ii.
B106113E01
1.063,0.272 1.510,0.553 0.448,0.281 10 SST

Press the SST activation switch and check that the LED of the SST activation switch illuminates.

CAUTION:

If the LED illuminates when the activation switch is not being pressed, SST may be malfunctioning. Replace SST with a new one.




b.

Disconnect SST from the battery.


c.

Disconnect the pretensioner connector.

i.

Disconnect the cable from the negative (-) battery terminal.


ii.

Remove the front door scuff plate (see page Vehicle Interior>INTERIOR>ROOF HEADLINING>REMOVAL).


iii.

Remove the rear door scuff plate (see page Vehicle Interior>INTERIOR>ROOF HEADLINING>REMOVAL).


iv.

Remove the rear door scuff plate (see page Vehicle Interior>INTERIOR>ROOF HEADLINING>REMOVAL).


v.

Remove the center pillar garnish lower (see page Vehicle Interior>INTERIOR>ROOF HEADLINING>REMOVAL).


vi.
B447696

Disconnect the pretensioner connector as shown in the illustration.



d.

Prepare SST for activation of the seat belt pretensioner.

i.

Install the floor anchor of the seat belt.


ii.
B447700E02
0.729,1.313 1.333,1.51 0.604,0.198 10 false SST (A) 2.104,1.313 2.708,1.51 0.604,0.198 10 false SST (B)

Connect SST (A) to SST (B). Then connect SST (B)'s connector to the seat belt pretensioner.

SST
09082-00700  
09082-00770  

NOTICE:

To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock.



iii.
B107392E07
1.177,1.781 2.156,2.115 0.979,0.333 10 false 10 m or more

Move SST at least 10 m (33 ft.) away from the front of the vehicle.


iv.

Close all the doors and windows of the vehicle.

HINT:

Leave a gap in one of the windows for inserting SST wire harness.


NOTICE:

Take care not to damage the SST wire harness.



v.

Connect SST's red clip to the battery's positive (+) terminal and the black clip to the negative (-) terminal.



e.

Activate the seat belt pretensioner.

i.

Confirm that no one is inside the vehicle or within 10 m (33 ft.) of the vehicle.


ii.

Press the SST activation switch to activate the seat belt pretensioner.

HINT:

The seat belt pretensioner operates at the same time the SST activation switch's LED illuminates.




f.

Dispose of the front seat outer belt (with the seat belt pretensioner).

CAUTION:
·

Do not touch the front seat outer belt for at least 30 minutes after the seat belt pretensioner has been activated. It is very hot.

·

Use gloves and safety glasses when handling a front seat outer belt whose pretensioner has been activated.

·

Always wash your hands with water after completing the disposal.

·

Do not apply water to a front seat outer belt that has an activated pretensioner.



HINT:

When scrapping a vehicle, activate the seat belt pretensioner, and then scrap the vehicle with the activated front seat outer belt installed.



Hide 73210 2.DISPOSE OF FRONT SEAT OUTER BELT ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

NOTICE:
·

When only disposing of the front seat outer belt (with the seat belt pretensioner), never use the customer's vehicle to activate the seat belt pretensioner.

·

Be sure to follow the procedures listed below when activating the seat belt pretensioner.



a.

Remove the front seat outer belt assembly.

i.
B447701E02
2.323,0.604 2.542,0.833 0.219,0.229 10 false *b 2.542,0.052 2.781,0.281 0.24,0.229 10 false *a

Wind the seat belt with the retractor.

Text in Illustration
*a Cut
*b 100 mm (3.94 in.)


ii.

When the seat belt is sufficiently wound, cut the seat belt approximately 100 mm (3.94 in.) from the retractor, as shown in the illustration.

HINT:

The seat belt is designed so that winding the seat belt before pretensioner activation will decrease the pulling power of the seat belt during pretensioner activation.




b.
B106112E01
0.225,1.238 0.555,1.439 0.330,0.201 10 SST 2.73,0.587 3.254,0.788 0.524,0.201 10 Battery

Check if SST is functioning properly.

SST
09082-00700  
09082-00770  

CAUTION:

When activating a seat belt pretensioner, always use the specified SST.



c.
B447700E02
0.729,1.313 1.333,1.51 0.604,0.198 10 false SST (A) 2.104,1.313 2.708,1.51 0.604,0.198 10 false SST (B)

Prepare SST for activation of the seat belt pretensioner.

i.

Connect SST (A) to SST (B). Then connect SST (B)'s connector to the seat belt pretensioner.

NOTICE:

To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock.



ii.
B447702E02
2.563,1.385 3.292,1.656 0.729,0.271 10 false SST (A) 2.01,1.927 2.698,2.125 0.688,0.198 10 false SST (B)

Place the front seat outer belt assembly on the ground and cover it with a tire (with wheel).

NOTICE:

Set up the front seat outer belt as shown in the illustration.



iii.
B447703E02
1.333,0.708 1.604,0.198 1.604,0.198 1.729,0.198 false 1.594,1.938 1.792,2.146 0.198,0.208 10 false *b 1.729,0.063 1.927,0.271 0.198,0.208 10 false *a

Move SST at least 10 m (33 ft.) away from the wheel.

Text in Illustration
*a 12 V Battery
*b 10 m (33 ft.) or more

NOTICE:

Take care not to damage the SST wire harness.




d.

Activate the seat belt pretensioner.

i.

Connect SST's red clip to the battery's positive (+) terminal and the black clip to the battery's negative (-) terminal.


ii.

Check that no one is within 10 m (33 ft) of the wheel.


iii.

Press the SST activation switch to activate the seat belt pretensioner.

HINT:

The seat belt pretensioner operates at the same time the SST activation switch's LED illuminates.




e.

Dispose of the front seat outer belt (with the seat belt pretensioner).

CAUTION:
·

Do not touch the front seat outer belt for at least 30 minutes after the seat belt pretensioner has been activated. It is very hot.

·

Use gloves and safety glasses when handling a front seat outer belt whose pretensioner has been activated.

·

Always wash your hands with water after completing the disposal.

·

Do not apply water to a front seat outer belt that has an activated pretensioner.



i.

Remove the tire (with wheel) and SST.


ii.
B447704

Place the front seat outer belt in a plastic bag, tie the end tightly and dispose of it in the same way as other general parts.