73320A
1.INSTALL NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH
Install the belt with the nut.
Install the belt sensor with the 3 nuts.
73373F
2.INSTALL REAR SEAT SHOULDER BELT HOLE COVER
Attach the 4 claws to install the rear shoulder belt cover.
Pass the seat belt through the guide wire.
Attach the 4 claws to install the rear shoulder belt cover.
71695A
3.INSTALL REAR SEAT PROTECTOR NO. 1
Install the rear NO. 1 seat protector with the clip.
79014
4.INSTALL NO. 1 SEATBACK COVER SUB-ASSEMBLY LH
72667
5.INSTALL REAR SEATBACK LOCK BEZEL UPPER
73320A
6.CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY
Install the anchor with the bolt.
The anchor part of the seat belt must not overlap the protruding part.
72830J
7.INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY RH
71877B
8.INSTALL REAR SEAT ARMREST HOLE COVER RH
72840
9.INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY LH
71877B
10.INSTALL REAR SEAT ARMREST HOLE COVER LH
71833C
11.INSTALL REAR NO. 2 SEAT RECLINING COVER RH
71834A
12.INSTALL REAR NO. 1 SEAT RECLINING COVER LH
72526B
13.INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH
14.INSTALL REAR SEAT ASSEMBLY
71940A
15.INSTALL REAR SEAT HEADREST ASSEMBLY