Home › Vehicle Interior › LIGHTING › LIGHTING SYSTEM(except LED Headlight) › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291933 LIGHTING SYSTEM(except LED Headlight) C

LIGHTING  LIGHTING SYSTEM(except LED Headlight)  B2412  Headlight Swivel Motor LH Malfunction  B2413  Headlight Swivel Motor RH Malfunction  


DESCRIPTION

The AFS ECU operates the headlight swivel motor in accordance with the vehicle speed and steering angle.

The AFS ECU also receives information from the headlight swivel motor.

DTC No. DTC Detection Condition Trouble Area
B2412 When one of following conditions is met:
·

Open or short between AFS ECU and headlight swivel motor LH

·

Abnormal headlight swivel motor LH power supply voltage

·

Headlight swivel motor LH gear faulty


·

Headlight assembly LH (Headlight swivel motor LH)

·

AFS ECU

·

Wire harness


B2413 When one of following conditions is met:
·

Open or short between AFS ECU and headlight swivel motor RH

·

Abnormal headlight swivel motor RH power supply voltage

·

Headlight swivel motor RH gear faulty


·

Headlight assembly RH (Headlight swivel motor RH)

·

AFS ECU

·

Wire harness



WIRING DIAGRAM

E132266E01
5.326,5.977 6.341,6.129 1.015,0.153 10 A28 5.326,6.136 6.341,6.289 1.015,0.153 10 AFS ECU 1.122,1.485 2.136,1.638 1.015,0.153 10 B2 4.829,0.487 5.298,0.640 0.469,0.153 10 SMBL 4.829,0.962 5.298,1.115 0.469,0.153 10 SMGL 4.633,0.622 4.737,0.774 0.104,0.153 10 1 4.55,1.096 4.737,1.249 0.186,0.153 10 23 2.355,0.487 2.824,0.640 0.469,0.153 10 SMBL 2.355,0.962 2.824,1.115 0.469,0.153 10 SBGL 2.955,0.622 3.059,0.774 0.104,0.153 10 3 2.955,1.096 3.059,1.249 0.104,0.153 10 1 2.355,2.75 2.824,2.903 0.469,0.153 10 SMBR 2.355,3.168 2.824,3.321 0.469,0.153 10 SBGR 2.955,2.885 3.059,3.038 0.104,0.153 10 3 2.955,3.303 3.059,3.455 0.104,0.153 10 1 4.829,2.75 5.298,2.903 0.469,0.153 10 SMBR 4.829,3.168 5.298,3.321 0.469,0.153 10 SMGR 4.591,2.885 4.706,3.038 0.115,0.153 10 2 4.54,3.303 4.736,3.455 0.197,0.153 10 24 4.829,5.116 5.298,5.269 0.469,0.153 10 IGS 4.829,5.578 5.298,5.731 0.469,0.153 10 E1 4.54,5.251 4.726,5.404 0.186,0.153 10 14 3.02,5.251 3.806,5.404 0.786,0.153 10 LH ECU-IG 4.54,5.712 4.736,5.865 0.197,0.153 10 22 1.122,1.645 2.757,1.798 1.635,0.153 10 Headlight LH 0.855,0.338 1.712,0.679 0.856,0.341 10 Headlight Swivel Motor 0.855,2.569 1.712,2.910 0.856,0.341 10 Headlight Swivel Motor 1.122,3.716 2.136,3.869 1.015,0.153 10 B17 1.122,3.876 2.757,4.029 1.635,0.153 10 Headlight RH 1.579,5.081 2.367,5.234 0.788,0.153 10 from Battery

PROCEDURE

1.INSPECT FUSE (LH ECU-IG)
a.

Remove the LH ECU-IG fuse from the main body ECU.


b.

Measure the resistance of the fuse.

Standard resistance:

Below 1 Ω




OK

2.CHECK WIRE HARNESS (AFS ECU - BATTERY AND BODY GROUND)

NG

REPLACE FUSE

2.CHECK WIRE HARNESS (AFS ECU - BATTERY AND BODY GROUND)
a.
U189879E01
0.038,0.063 1.403,0.219 1.364,0.156 10 Wire Harness Side: 1.639,0.534 1.934,0.672 0.295,0.138 10 A28 0.211,1.836 0.505,1.974 0.295,0.138 10 IGS 1.444,1.836 1.739,1.974 0.295,0.138 10 E1 0.357,1.41 0.357,1.822 false 1.565,1.41 1.565,1.822 false

Disconnect the A28 ECU connector.


b.

Measure the voltage and resistance of the wire harness side connector.

Standard voltage:
Tester Connection Condition Specified Condition
A28-14 (IGS) - Body ground Ignition switch on (IG) 10 to 14 V


Standard resistance:
Tester Connection Specified Condition
A28-22 (E1) - Body ground Below 1 Ω




OK

3.CHECK WIRE HARNESS (AFS ECU - HEADLIGHT (HEADLIGHT SWIVEL MOTOR))

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK WIRE HARNESS (AFS ECU - HEADLIGHT (HEADLIGHT SWIVEL MOTOR))
a.
U189906E02
1.865,2.25 1.865,1.74 false 1.167,2.25 1.708,1.74 false 0.635,1.521 0.865,1.01 false 0.51,1.531 0.354,1.021 false 1.771,4.094 2.042,4.313 false 1.594,4.073 1.521,4.333 false 1.635,3.708 2.115,3.323 false 1.646,3.823 2.198,4.042 false 0.188,0.115 1.573,0.26 1.385,0.146 10 false Wire Harness Side: 1.49,0.51 2.167,0.656 0.677,0.146 10 false AFS ECU 0.125,0.813 0.563,0.958 0.438,0.146 10 false SMBL 0.813,0.813 1.25,0.958 0.438,0.146 10 false SMBR 0.938,2.271 1.375,2.417 0.438,0.146 10 false SMGL 2.167,3.24 2.708,3.385 0.542,0.146 10 false SBGL*1 2.26,3.99 2.833,4.135 0.573,0.146 10 false SBGR*2 2.073,4.271 2.646,4.417 0.573,0.146 10 false SMBL*1 1.26,4.344 1.833,4.49 0.573,0.146 10 false SMBR*2 1.656,2.292 2.115,2.438 0.458,0.146 10 false SMGR 1.656,0.938 1.938,1.083 0.281,0.146 10 false A28 0.656,3.323 0.885,3.469 0.229,0.146 10 false B2 0.083,4.167 0.76,4.313 0.677,0.146 10 false *1: for LH 0.958,2.719 2.438,2.865 1.479,0.146 10 false Headlight Swivel Motor 0.104,4.385 0.781,4.531 0.677,0.146 10 false *2: for RH 0.635,3.708 0.917,3.854 0.281,0.146 10 false B17 1.052,3.323 1.333,3.469 0.281,0.146 10 false *1 1.042,3.729 1.323,3.875 0.281,0.146 10 false *2

Disconnect the A28 ECU connector.


b.

Disconnect the B2 (for LH) and B17 (for RH) swivel motor connector.


c.

Measure the resistance of the wire harness side connectors.

Standard resistance:
for LH
Tester Connection Specified Condition
A28-1 (SMBL) - B2-3 (SMBL) Below 1 Ω
A28-23 (SMGL) - B2-1 (SBGL) Below 1 Ω
A28-1 (SMBL) or B2-3 (SMBL) - Body ground 10 kΩ or higher
A28-23 (SMGL) or B2-1 (SBGL) - Body ground 10 kΩ or higher

for RH
Tester Connection Specified Condition
A28-2 (SMBR) - B17-3 (SMBR) Below 1 Ω
A28-24 (SMGR) - B17-1 (SBGR) Below 1 Ω
A28-2 (SMBR) or B17-3 (SMBR) - Body ground 10 kΩ or higher
A28-24 (SMGR) or B17-1 (SBGR) - Body ground 10 kΩ or higher




OK

4.CHECK AFS ECU

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK AFS ECU
a.
E130953E01
2.83,0.425 3.245,0.580 0.415,0.156 10 SMBL 2.141,0.425 2.576,0.580 0.435,0.156 10 SMBR 1.145,1.822 1.595,1.977 0.451,0.156 10 SMGR 1.831,1.822 2.266,1.977 0.435,0.156 10 SMGL 2.903,1.115 3.065,0.631 false 1.436,1.795 1.599,1.31 false 2.762,1.115 2.446,0.631 false 2.043,1.791 1.727,1.307 false

Reconnect the A28 ECU connector.


b.

Measure the voltage and resistance of the connector.

Standard voltage:
for LH
Tester Connection Condition Specified Condition
1 (SMBL) - Body ground Ignition switch on (IG) 10 to 14 V

for RH
Tester Connection Condition Specified Condition
2 (SMBR) - Body ground Ignition switch on (IG) 10 to 14 V


Standard resistance:
for LH
Tester Connection Specified Condition
23 (SMGL) - Body ground Below 1 Ω

for RH
Tester Connection Specified Condition
24 (SMGR) - Body ground Below 1 Ω




OK

5.REPLACE HEADLIGHT ASSEMBLY (HEADLIGHT SWIVEL MOTOR)

NG

6.REPLACE AFS ECU
5.REPLACE HEADLIGHT ASSEMBLY (HEADLIGHT SWIVEL MOTOR)
a.

Replace the headlight LH or RH with a new one.


b.

Check for DTCs again.

Result
Result Proceed to
DTC is not output A
DTC is output B



A

END

B

6.REPLACE AFS ECU
6.REPLACE AFS ECU

NEXT

7.PERFORM INITIALIZATION
7.PERFORM INITIALIZATION

NEXT

END