The AFS ECU receives the vehicle speed signal from the ABS and traction actuator*1 (skid control ECU) or brake actuator*2 (skid control ECU) via the CAN communication line.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2415 | AFS ECU cannot receive signal from vehicle speed sensor normally | ·
AFS ECU ·
ABS and traction actuator*1 (skid control ECU) ·
Brake actuator*2 (skid control ECU) ·
CAN communication system |
*1: w/ VSC
*2: w/o VSC
Check for DTCs related to the brake system.
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output (w/o VSC) | B |
| DTC is output (w/ VSC) | C |
C0200/31, C0205/32, C1235/35 or C1236/36 is a corresponding DTC.
A
B
C
NEXT
Perform initialization (see page Vehicle Interior>LIGHTING>LIGHTING SYSTEM(except LED Headlight)>INITIALIZATION).
NEXT