The AFS ECU stores this DTC if the sensor value received from the height control sensor is out of range when performing initialization of the AFS ECU; for example, the vehicle is not level or being jacked up.
| DTC No. | DTC Detecting Condition | Trouble Area |
|---|---|---|
| B2452 | Vehicle condition not specified when initializing | ·
Vehicle condition when initializing ·
AFS ECU |
Perform initialization of the AFS ECU (See page Vehicle Interior>LIGHTING>LIGHTING SYSTEM(except LED Headlight)>INITIALIZATION).
Before initializing, make sure that the vehicle condition is proper for initialization.
Be sure to perform the initialization as instructed.
NEXT
Using the intelligent tester, recheck for DTCs.
| Result | Proceed to |
|---|---|
| B2452 is not output. | A |
| B2452 is output. | B |
If the AFS ECU stores B2452 even though the ECU has been initialized as instructed, there may be a malfunction in the AFS ECU.
A
B