81250
1.INSTALL ROOM NO. 2 LIGHT ASSEMBLY
Attach the 4 claws and 2 clips to install the room light.
Attach the 4 claws to install the roof wire.
81290
2.INSTALL ROOM NO. 3 LIGHT ASSEMBLY
Use the same procedures as for the No. 2 room light assembly.
63310
3.INSTALL ROOF HEADLINING ASSEMBLY
Install the roof headlining (see page Vehicle Interior>INTERIOR>ROOF HEADLINING>INSTALLATION).
4.PERFORM INITIALIZATION
Perform initialization (see page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.