Home › Vehicle Interior › LIGHTING › DOOR COURTESY LIGHT
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291956 DOOR COURTESY LIGHT A

LIGHTING  DOOR COURTESY LIGHT  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 81230 1.INSTALL COURTESY LIGHT ASSEMBLY

B145075

a.

Connect the connector.


b.

Install the courtesy light with the claw to the front door trim.


Hide 2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 3.PERFORM INITIALIZATION

a.

Perform initialization (see page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.