Home › Vehicle Interior › LIGHTING › PERSONAL LIGHT ASSEMBLY
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291962 PERSONAL LIGHT ASSEMBLY A

LIGHTING  PERSONAL LIGHT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 81260A 1.INSTALL MAP LIGHT ASSEMBLY

B462237E01
1.823,0.927 1.583,0.167 1.583,0.167 1.406,0.167 false 0.458,0.083 1.604,0.281 1.146,0.198 10 false w/ Sliding Roof

a.

Attach the 8 claws to install the roof wire.


b.

Connect the connector.


c.

Attach the 3 claws and 4 clips to install the map light.

B459610E01
4.083,0.76 4.396,0.958 0.313,0.198 10 false Front 3.333,2.073 3.646,2.271 0.313,0.198 10 false (2) 3.021,2.344 3.333,2.542 0.313,0.198 10 false (1)


Hide 2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 3.PERFORM INITIALIZATION

a.

Perform initialization (see page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.