86101J
1.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY
| *A | w/o Sliding Roof | *B | w/ Sliding Roof |
|
Tape | - | - |
|
Front | - | - |
Engage the 5 clamps.
Apply tape to the marked areas of the roof headlining assembly to install the No. 2 antenna cord sub-assembly.
63310
2.INSTALL ROOF HEADLINING ASSEMBLY
86101
3.INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)
for Plug Type Antenna Cord:
Engage the 5 clamps to antenna cord sub-assembly.
Connect the 2 connectors.
for Connector Type Antenna Cord:
Engage the 5 clamps to antenna cord sub-assembly.
Connect the connector.
86101
4.INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)
Engage the 5 clamps to antenna cord sub-assembly.
Connect the 2 connectors.
55312
5.INSTALL INSTRUMENT PANEL LOWER