1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
45186
2.REMOVE NO. 2 STEERING WHEEL COVER LOWER
45187
3.REMOVE NO. 3 STEERING WHEEL COVER LOWER
45130
4.REMOVE STEERING PAD ASSEMBLY
45117
5.REMOVE BEZEL LOWER LH
Using a screwdriver, remove the bezel lower.
45116
6.REMOVE BEZEL LOWER RH
Using a screwdriver, remove the bezel lower.
84250A
7.REMOVE STEERING PAD SWITCH ASSEMBLY
Disconnect the connector from the spiral cable.
Remove the screws.
Detach the 2 claws and remove the steering pad switch LH.
Detach the 2 claws and remove the steering pad switch RH.