45130
1.REMOVE STEERING PAD ASSEMBLY (for LHD)
45130
2.REMOVE STEERING PAD ASSEMBLY (for RHD)
45117
3.REMOVE NO. 2 STEERING WHEEL ORNAMENT (for LHD)
Using a screwdriver, disengage the 3 claws to remove the No. 2 steering wheel ornament.
| *a | Protective Tape |
Tape the screwdriver tip before use.
84247A
4.REMOVE STEERING PAD SWITCH LH (for LHD)
w/o Navigation System:
Disconnect the steering pad switch connector from the spiral cable with steering angle sensor.
Remove the screw.
Disengage the 2 pins to remove the steering pad switch LH.
45116
5.REMOVE NO. 1 STEERING WHEEL ORNAMENT (for LHD)
w/ Navigation System:
Using a screwdriver, disengage the 3 claws to remove the No. 1 steering wheel ornament.
| *a | Protective Tape |
Tape the screwdriver tip before use.
84250A
6.REMOVE STEERING PAD SWITCH ASSEMBLY (for LHD)
w/ Navigation System:
Disconnect the steering pad switch connector from the spiral cable with steering angle sensor.
Remove the screw.
Disengage the 2 pins.
Remove the screw.
Disengage the 2 pins to remove the steering pad switch assembly.
84250A
7.REMOVE STEERING PAD SWITCH ASSEMBLY (for RHD)
Disconnect the steering pad switch connector from the spiral cable with steering angle sensor.
Remove the 2 screws.
| *a | Pin |
| *b | Guide |
Disengage the 2 claws, 2 pins and 3 guides to remove the steering pad switch assembly.