Home › Vehicle Interior › ENGINE HOOD / DOOR › HOOD › from 2016.05
RM24M0E _58 Vehicle Interior _059569 ENGINE HOOD / DOOR _0292025 HOOD N

ENGINE HOOD / DOOR  HOOD  ADJUSTMENT  


CAUTION / NOTICE / HINT

B057104E52
0.198,1.385 1.333,1.604 1.135,0.219 10 false Centering Bolt 2.208,1.438 3.271,1.667 1.063,0.229 10 false Standard Bolt

HINT:

Centering bolts are used to mount the hood hinge and hood lock. The hood and hood lock cannot be adjusted with the centering bolts on. Substitute the centering bolts with standard bolts (with washers) when making adjustments.


PROCEDURE

Hide 53301 1.INSPECT HOOD SUB-ASSEMBLY

Hide 2.ADJUST HOOD SUB-ASSEMBLY

a.

Horizontally and vertically adjust the hood.

i.

Loosen the hinge bolts of the hood.


ii.
B136611

Adjust the clearance between the hood and front fenders by moving the hood.


iii.

Tighten the hinge bolts after the adjustment.

Torque:
11.5 N*m (117 kgf*cm, 8 ft.*lbf)



b.

Adjust the height of the front end of the hood using the hood bumper cushions.

i.
B448181

Adjust the hood bumper cushions so that the heights of the hood and fenders are aligned.

HINT:

Raise or lower the front end of the hood by turning the hood bumper cushions.




c.

Adjust the hood lock.

i.
B136614

Loosen the 3 bolts.


ii.

Adjust the hood lock assembly and tighten the 3 bolts.

Torque:
7.5 N*m (77 kgf*cm, 66 in.*lbf)


iii.

Check that the striker can engage the hood lock smoothly.