Home › Drivetrain › K112 (CVT) › CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM
RM24M0E _52 Drivetrain _059572 K112 CVT _0292047 CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM D

K112 CVT  CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM  SYSTEM DESCRIPTION  


SYSTEM DESCRIPTION


a.

The K112 (CVT) is a fully electrohydraulically controlled metal belt type continuously variable transaxle. This is a highly efficient transaxle that is controlled in conjunction with the engine, contributing to enhanced fuel efficiency and quietness without shift shock.

In addition, the continuously variable transaxle has the following features:

·

Diagnostic function

·

Fail-safe function when a malfunction occurs




FUNCTION OF MAIN COMPONENTS


Component Outline
Shift solenoid valve DS1 Controls the oil flow to the primary pulley according to the vehicle speed and accelerator pedal position.
Shift solenoid valve DS2 Controls the oil flow from the primary pulley according to the vehicle speed and accelerator pedal position.
Shift solenoid valve SL Switches the usage of shift solenoid valve SLS.
Shift solenoid valve DSU Controls the oil pressure for lock-up clutch engagement.
Shift solenoid valve SLS Controls belt clamping pressure according to the input torque. Moreover, while the forward and reverse clutch is engaged, it controls the forward and reverse clutch oil pressure.
Transmission revolution sensor (NIN) Detects the primary pulley revolution speed.
Transmission revolution sensor (NOUT) Detects the secondary pulley revolution speed.
Transmission revolution sensor (NT) Detects the input turbine revolution speed.
CVT oil temperature sensor Detects the CVT fluid temperature.
CVT oil pressure sensor Detects the CVT oil pressure for belt clamping force.
Engine coolant temperature sensor Detects the engine coolant temperature.
Accelerator pedal position sensor Detects the opening angle of the acceleration pedal.
Stop light switch Detects the state of the brake pedal.
Park/neutral position switch Detects the position of the shift lever.
ECM Controls the transaxle based on the signal from each sensor. It has a diagnosis mode and fail-safe functions as a service when the system has malfunctioned.
DLC3 Used for connecting the diagnosis tool to read diagnostic trouble code and ECM data.