When the ECM receives an error signal from the brake actuator assembly (skid control ECU), DTC P1750 is stored.
| DTC No. | DTC Detection Condition
1.
Diagnosis Condition 2.
Malfunction Status 3.
Malfunction Time 4.
Other |
Trouble Area |
|---|---|---|
| P1750 | 1.
- 2.
The ECM receives an error signal from the brake actuator assembly (skid control ECU). 3.
3 seconds 4.
1 trip detection logic |
Vehicle stability control system |
Check for DTCs of the brake control system.
Refer to vehicle stability control system (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
A
B