Home › Drivetrain › K112 (CVT) › OIL PAN
RM24M0E _52 Drivetrain _059572 K112 CVT _0292055 OIL PAN A

K112 CVT  OIL PAN  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL LH

Hide 51441 2.REMOVE NO. 1 ENGINE UNDER COVER

Hide 53702 3.REMOVE FRONT FENDER APRON LH

Hide 51218A 4.REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH

Hide 35125 5.REMOVE NO. 1 TRANSMISSION OIL FILLER TUBE

a.
C128915

Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the continuously variable transaxle assembly.


b.
C287691E02
2.698,0.802 2.615,0.802 2.615,0.802 2.396,1.021 true 2.729,0.719 2.896,0.917 0.167,0.198 10 false *1

Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the oil pan and drain the continuously variable transaxle fluid.

Text in Illustration
*1 No. 1 Transmission Oil Filler Tube


Hide 35106L 6.REMOVE TRANSAXLE OIL PAN SUB-ASSEMBLY

a.
C287696

Remove the 19 bolts and oil pan from the transaxle.

NOTICE:

Some fluid will remain in the oil pan. To prevent the fluid from spilling, place a container under the oil pan, and then carefully remove all the pan bolts and oil pan sub-assembly.



b.

Remove the gasket from the oil pan.


c.
C287697E01
3.006,0.766 3.197,0.984 0.191,0.218 10 *1 2,1.061 2.964,0.886 2.964,0.886 1.842,1.562 false 1.525,1.518 2.964,0.886 false

Remove the 3 magnets from the oil pan.

Text in Illustration
*1 Magnet

NOTICE:
·

Clean the oil pan and remove any metal particles, sludge, etc.

·

Clean off any metal particles that adhere to the magnets.