Home › Drivetrain › K112 (CVT) › SHIFT LEVER › 2013.04–2016.05
RM24M0E _52 Drivetrain _059572 K112 CVT _0292058 SHIFT LEVER A

K112 CVT  SHIFT LEVER  DISASSEMBLY  


PROCEDURE

Hide 85903 1.REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY

a.
C264766

Disconnect the connector from the shift lock control ECU sub-assembly.


b.
C264767

Disengage the 3 claws and remove the shift lock control ECU sub-assembly from the shift lock control unit assembly.


Hide 35971A 2.REMOVE UPPER POSITION INDICATOR HOUSING

a.
C264768

Remove the clamp from the upper position indicator housing.


b.
C264769

Disengage the 4 claws and remove the upper position indicator housing from the shift lock control unit assembly.

NOTICE:

Do not damage the claws of the upper position indicator housing when removing it from the shift lock control unit.



Hide 35975 3.REMOVE POSITION INDICATOR SLIDE COVER

a.
C140275

Remove the position indicator slide cover from the shift lock control unit assembly.


Hide 35976 4.REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

a.
C140276

Remove the No. 2 position indicator slide cover from the position indicator slide cover.


Hide 35974 5.REMOVE LOWER POSITION INDICATOR HOUSING

a.
C264770

Disconnect the connector.


b.

Using a screwdriver, disengage the 2 claws and remove the lower position indicator housing from the shift lock control unit assembly.

NOTICE:

Do not damage the claws of the lower position indicator housing when removing it from the shift lock control unit.