35974
1.INSTALL LOWER POSITION INDICATOR HOUSING
Install the lower position indicator housing as shown in the illustration and engage the 2 claws.
Engage the claw to install the connector case to the shift lock control unit assembly.
35976
2.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER
Install the No. 2 position indicator slide cover to the position indicator slide cover.
35975
3.INSTALL POSITION INDICATOR SLIDE COVER
Install the position indicator slide cover to the shift lock control unit assembly.
35971A
4.INSTALL UPPER POSITION INDICATOR HOUSING
Install the upper position indicator housing to the shift lock control unit assembly and engage the 4 claws.
| *a | Left Side |
| *b | Right Side |
Clamp the wire to the upper position indicator housing with a new cable tie.
85903
5.INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
Engage the 3 claws to install the shift lock control ECU sub-assembly to the shift lock control unit assembly.
Connect the shift lock solenoid connector.