Home › Drivetrain › U241E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE UNIT › from 2014.09
RM24M0E _52 Drivetrain _059578 U241E AUTOMATIC TRANSMISSION / TRANSAXLE _0292088 AUTOMATIC TRANSAXLE UNIT A

U241E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE UNIT  DISASSEMBLY  


PROCEDURE

Hide 33403M 1.REMOVE SPEEDOMETER DRIVEN HOLE COVER SUB-ASSEMBLY

a.

Remove the bolt and hole cover from the transaxle.


b.

Remove the O-ring from the hole cover.


Hide 84540 2.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.
C310483

Remove the nut, washer and control shaft lever from the manual valve lever shaft.


b.
C222550

Pry out the lock plate and remove the lock nut and lock plate from the park/neutral position switch assembly.


c.
C222552

Remove the 2 bolts and park/neutral position switch assembly from the automatic transaxle assembly.


Hide 35104V 3.REMOVE BREATHER PLUG HOSE

a.

Remove the breather plug hose from the breather plug.


Hide 32921C 4.REMOVE OIL COOLER OUTLET TUBE UNION

C127449

a.

Remove the union.


b.

Remove the O-ring from the union.


Hide 32921C 5.REMOVE OIL COOLER INLET TUBE UNION

C127450

a.

Remove the union.


b.

Remove the O-ring from the union.


Hide 89413B 6.REMOVE SPEED SENSOR

a.
D003900

Remove the 2 bolts and 2 speed sensors from the transaxle.


b.

Remove the 2 O-rings from the sensors.


Hide 33403M 7.REMOVE SPEEDOMETER DRIVEN HOLE COVER SUB-ASSEMBLY

a.

Remove the bolt and the hole cover.


b.

Remove the O-ring from the hole cover.


Hide 35104Q 8.REMOVE NO. 1 TRANSAXLE CASE PLUG

a.
C134982

Remove the 4 plugs from the transaxle.


b.

Remove the 4 O-rings from the 4 plugs.


Hide 30500 9.FIX AUTOMATIC TRANSAXLE ASSEMBLY

D009176

Hide 35106D 10.REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

a.
D009177

Remove the 18 bolts.


b.

Remove the oil pan and 3 magnets.


c.

Remove the gasket from the oil pan.


Hide 35106D 11.INSPECT AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

Hide 35330 12.REMOVE VALVE BODY OIL STRAINER ASSEMBLY

a.
D009179

Remove the 3 bolts and oil strainer.


b.
D009180

Remove the O-ring from the oil strainer.


Hide 82125J 13.REMOVE TRANSMISSION WIRE

a.
C130917E11
2.604,1.281 2.479,0.469 2.479,0.469 2.594,0.469 true 2.635,0.396 3.333,0.583 0.698,0.188 10 false Lock Plate

Remove the 5 connectors from the shift solenoid valves.


b.

Remove the bolt, clamp and ATF temperature sensor.


c.
C367485

Remove the bolt and transaxle solenoid wire from the transaxle.


d.
C367486

Remove the O-ring from the transaxle solenoid wire.


Hide 35410 14.REMOVE TRANSMISSION VALVE BODY ASSEMBLY

a.
C367487

Support the valve body assembly and remove the 17 bolts and the valve body assembly.


Hide 35148 15.REMOVE NO. 1 GOVERNOR APPLY GASKET

a.
C083127

Remove the governor apply gasket from the transaxle.


Hide 35149B 16.REMOVE TRANSAXLE CASE 2ND BRAKE GASKET

a.
C083128

Remove the 2nd brake gasket from the transaxle.


Hide 35159 17.REMOVE BRAKE DRUM GASKET

a.
C083129

Remove the brake drum gasket from the transaxle.


Hide 35251 18.REMOVE CHECK BALL BODY

a.
D003554

Remove the check ball body and spring from the transaxle.


Hide 35426D 19.REMOVE C-3 ACCUMULATOR PISTON

a.
D003555

Remove the compression spring from the C-3 accumulator piston.


b.
D003556

Apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the oil hole and remove the C-3 accumulator piston.

NOTICE:
·

Applying compressed air may cause the piston to jump out. When removing the piston, hold it with your hand using a waste cloth.

·

Make sure not to spatter ATF when applying compressed air.




c.
D003902

Remove the O-ring from the C-3 accumulator piston.


Hide 35424C 20.REMOVE C-1 ACCUMULATOR PISTON

a.
D003557

Apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the oil hole and remove the C-1 accumulator piston and compression spring.

NOTICE:
·

Applying compressed air may cause the piston to jump out. When removing the piston, hold it with your hand using a waste cloth.

·

Make sure not to spatter ATF when applying compressed air.




b.
D003903

Remove the 2 O-rings from the C-1 accumulator piston.


Hide 35427K 21.REMOVE B-3 ACCUMULATOR PISTON

a.
D003558

Apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the oil hole and remove the B-3 accumulator piston and 2 compression springs.

NOTICE:
·

Applying compressed air may cause the piston to jump out. When removing the piston, hold it with your hand using a waste cloth.

·

Make sure not to spatter ATF when applying compressed air.




b.
D003904

Remove the O-ring from the B-3 accumulator piston.


Hide 35409 22.REMOVE MANUAL DETENT SPRING SUB-ASSEMBLY

a.
D003560

Remove the 2 bolts, manual detent spring and cover.


Hide 35595 23.REMOVE PARKING LOCK PAWL BRACKET

a.
C056727

Remove the 2 bolts and parking lock pawl bracket.


Hide 35506J 24.REMOVE MANUAL VALVE LEVER SHAFT RETAINER SPRING

a.
D003559

Using needle-nose pliers, remove the retainer spring.


Hide 35505 25.REMOVE MANUAL VALVE LEVER SUB-ASSEMBLY

a.
D003563

Using a chisel and hammer, unstake and remove the manual valve lever spacer.


b.
D003564

Using a pin punch and hammer, tap out the manual valve lever shaft spring pin.

HINT:

Slowly drive out the pin so that it will not fall into the transaxle.



c.
D003565

Remove the manual valve lever shaft and manual valve lever.


Hide 35501 26.REMOVE PARKING LOCK ROD SUB-ASSEMBLY

a.
D003905

Remove the parking lock rod from the manual valve lever.


Hide 35506F 27.REMOVE MANUAL VALVE LEVER SHAFT OIL SEAL

a.
D003566

Using a screwdriver, pry out the oil seal from the transaxle.


Hide 35104Q 29.REMOVE NO. 1 TRANSAXLE CASE PLUG

a.
C134983

Remove the 2 plugs.


b.

Remove the 2 O-rings from the plug.


Hide 35111C 30.REMOVE TRANSAXLE HOUSING

a.
D009182

Remove the 16 bolts.


b.

Tap on the circumference of the transaxle housing with a plastic-faced hammer to remove the transaxle housing from the transaxle.

NOTICE:

Differential may be accidentally removed when the transaxle housing is removed.



Hide 34301B 31.REMOVE UNDERDRIVE CYLINDRICAL ROLLER BEARING

a.
D003606E09
0.469,1.219 1.292,1.167 false 0.083,1.115 0.406,1.281 0.323,0.167 10 false SST

Using SST, remove the cylindrical roller bearing from the transaxle.

SST
09514-35011  


Hide 34346 32.REMOVE UNDERDRIVE OUTPUT SHAFT OIL SEAL RING

a.
D003915

Remove the oil seal ring from the transaxle housing.


Hide 33.REMOVE OIL PUMP ASSEMBLY

a.
U136893

Remove the 7 bolts and oil pump assembly from the transaxle.


Hide 34736B 34.REMOVE THRUST NEEDLE ROLLER BEARING

a.
D025505

Remove thrust needle roller bearing from the underdrive planetary gear.


Hide 34736A 35.REMOVE NO. 2 THRUST BEARING UNDERDRIVE RACE

a.
D025506

Remove the thrust bearing race from the underdrive planetary gear.


Hide 36.REMOVE FRONT DIFFERENTIAL ASSEMBLY

a.
D003577

Remove the front differential from the transaxle.


Hide 35179 37.REMOVE OVERDRIVE BRAKE GASKET

a.
D003573

Remove the 2 overdrive brake gaskets from the transaxle.


Hide 38.REMOVE FORWARD CLUTCH ASSEMBLY

a.
D003574

Remove the forward clutch from the transaxle.


b.
D003906

Remove the thrust bearing from the forward clutch.


Hide 35631 39.REMOVE MULTIPLE DISC CLUTCH HUB

a.
D003575

Remove the thrust bearing, multiple clutch hub, needle roller bearing and bearing race from the transaxle.


Hide 40.REMOVE UNDERDRIVE PLANETARY GEAR ASSEMBLY

a.
D003576

Remove the bolt and parking pawl shaft clamp.


b.
D009201

Remove the parking lock pawl shaft.


c.
D008048

Push the parking lock pawl.

HINT:

Failure to do so will cause the interference when the underdrive planetary gear is removed.



d.
D003579

Remove the underdrive planetary gear from the transaxle.

NOTICE:

Be careful so that the underdrive planetary gear assembly will not fall out.



e.
D008049

Remove the spring, pawl pin and parking lock pawl.


Hide 41.REMOVE UNDERDRIVE CLUTCH ASSEMBLY

a.
D003580

Remove the underdrive clutch assembly, needle roller bearing, thrust bearing underdrive race from the transaxle.


Hide 34360 42.REMOVE UNDERDRIVE 1-WAY CLUTCH ASSEMBLY

a.
D003581

Using a screwdriver, pry out the snap ring from the transaxle.


b.
D003627

Remove the 1-way clutch from the transaxle.


c.
D009198

Remove the outer race retainer from the 1-way clutch.


Hide 34262 43.REMOVE NO. 2 UNDERDRIVE CLUTCH DISC

a.
D008050

Using a screwdriver, pry out the snap ring from the transaxle.


b.
D009197

Remove the flange, 3 discs and 3 plates from the transaxle.


Hide 34207 45.REMOVE UNDERDRIVE BRAKE RETURN SPRING SUB-ASSEMBLY

a.
D003610E06
2.354,0.573 2.698,0.448 false 2.729,0.354 3.042,0.521 0.313,0.167 10 false SST

Using SST, a snap ring expander and press, remove the snap ring from the transaxle.

SST
09387-00020  


b.
D008051

Remove the underdrive brake return spring from the underdrive brake piston.


Hide 34207 46.INSPECT UNDERDRIVE BRAKE RETURN SPRING SUB-ASSEMBLY

Hide 34244 47.REMOVE UNDERDRIVE CLUTCH DRUM OIL SEAL RING

a.
D003914

Remove the 2 oil seal rings from the transaxle.


Hide 35104Q 48.REMOVE NO. 1 TRANSAXLE CASE PLUG

a.
C134984

Remove the 2 plugs from the transaxle rear cover.


b.

Remove the 2 O-rings from the 2 plugs.


Hide 35102 49.REMOVE REAR TRANSAXLE COVER SUB-ASSEMBLY

a.
D009943

Remove the 11 bolts.


b.

Tap the circumference of the rear cover with a plastic-faced hammer to remove the transaxle rear cover from the transaxle.


c.
D009184

Remove the 2 outer rear clutch oil seal rings from the transaxle rear cover.


d.
C083140

Using a T30 ''torx'' socket wrench, remove the 2 screws and transaxle rear cover plate.


e.
D003801E05
0.99,0.667 1.302,0.323 false 1.333,0.229 1.656,0.396 0.323,0.167 10 false SST

Using SST, remove the needle-roller bearing from the transaxle rear cover.

SST
09387-00041  (09387-01010, 09387-01030, 09387-01040)


Hide 34253 50.REMOVE UNDERDRIVE BRAKE PISTON

a.
D003799

Apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the transaxle case to remove the underdrive brake piston.


b.
D003794

Remove the 2 O-rings from the underdrive brake piston.


Hide 35666D 51.REMOVE BRAKE APPLY TUBE

a.
D025510

Remove the bolt, clamp and 2 brake apply tubes.


b.

Remove the brake apply tube from the clamp.


Hide 35895 52.REMOVE FRONT CLUTCH APPLY TUBE

Hide 35148 53.REMOVE NO. 1 GOVERNOR APPLY GASKET

a.
D224469

Using a screwdriver, remove the 2 governor apply gaskets.


Hide 54.REMOVE DIRECT CLUTCH ASSEMBLY

a.
D003586

Remove the thrust bearing and direct clutch from the transaxle.


b.
D008053

Remove the bearing race from the direct clutch.


Hide 35730 55.REMOVE REAR PLANETARY SUN GEAR ASSEMBLY

a.
D003587

Remove the rear planetary sun gear from the transaxle.


b.
D003791

Remove the rear planetary sun gear thrust bearing from the rear planetary sun gear.


c.
D008054

Remove the No. 1 thrust washer and 1-way clutch thrust bearing from the rear planetary sun gear.


Hide 35790 56.REMOVE 1-WAY CLUTCH ASSEMBLY

a.
D008055

Remove the 1-way clutch from the transaxle.


b.
D003909

Remove the 1-way clutch inner race from the 1-way clutch.


Hide 35798A 57.REMOVE 1-WAY CLUTCH SLEEVE OUTER

D003589

Hide 35677 58.REMOVE 2ND BRAKE CLUTCH DISC

a.

Using a screwdriver, remove the 2nd brake hole snap ring.


b.
C129388

Remove the flange, 3 discs and 3 plates from the transaxle.


Hide 60.REMOVE 2ND BRAKE PISTON ASSEMBLY

a.
D008058

Using a screwdriver, pry out the snap ring.


b.
D008059

Remove the 2nd brake piston from the transaxle.


Hide 35677A 61.REMOVE 1ST AND REVERSE BRAKE CLUTCH DISC

a.
D009941

Remove the flange, 5 discs and 5 plates from the transaxle.


Hide 35760 63.REMOVE REAR PLANETARY GEAR ASSEMBLY

a.
D003616

Using a screwdriver, pry out the snap ring from the brake hub.


b.
D008062

Remove the rear planetary gear from the transaxle.


c.
D003910

Remove the thrust washer from the rear planetary gear.


d.
D003593

Remove the thrust bearing race from the rear planetary gear.


Hide 35714B 64.REMOVE INPUT SUN GEAR

a.
D003873

Remove the 2 thrust bearings, bearing race and input sun gear from the transaxle.


Hide 35720 65.REMOVE FRONT PLANETARY GEAR ASSEMBLY

a.
D003595

Using a chisel and hammer, unstake the lock washer.

NOTICE:

Push down all claws of the washer. Otherwise SST cannot be fully pressed against the nut and cannot loosen the nut.



b.
D003596E10
1.708,1.104 2.125,0.542 2.125,0.542 1.688,0.896 false 2.167,0.438 2.479,0.75 0.313,0.313 10 false SST

Using SST, remove the nut.

SST
09387-00030  
09387-00080  


c.
D003597E05
1.927,0.781 2.74,0.323 false 2.771,0.229 3.094,0.385 0.323,0.156 10 false SST

Using SST and a press, remove the front planetary gear from the counter drive gear.

SST
09950-60010  (09951-00450)


d.
D008063

Remove the front planetary gear from the brake hub.


Hide 35743 66.REMOVE FRONT PLANETARY RING GEAR

a.
D003615

Using a screwdriver, pry out the brake hub snap ring and front planetary ring gear from the brake hub.


Hide 35623H 67.REMOVE 1ST AND REVERSE BRAKE PISTON

a.
D003600E06
2.042,1.063 2.875,0.615 false 2.906,0.521 3.208,0.833 0.302,0.313 10 false SST

Using SST, a press and ring expander, remove the snap ring and piston return spring.

SST
09387-00070  

NOTICE:
·

Stop the press when the spring sheet is lowered 1 to 2 mm (0.039 to 0.078 in.) from the snap ring groove, preventing the spring sheet from deforming.

·

Do not expand the snap ring excessively.




b.
D008061

Remove the 1st and reverse brake return spring from the 1st and reverse brake piston.


c.
D003800

Apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the transaxle to remove the 1st and reverse brake piston.

NOTICE:
·

Applying compressed air may cause the piston to jump out. When removing the piston, hold it with your hand using a waste cloth.

·

Make sure not to spatter ATF when applying compressed air.




d.
D003913

Remove the 2 O-rings from the 1st and reverse brake piston.


Hide 35068 68.INSPECT 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY

Hide 35782C 69.REMOVE COUNTER DRIVE GEAR

a.
D003601E06
1.771,0.958 2.813,0.344 2.813,0.344 1.802,1.208 false 2.865,0.25 3.188,0.417 0.323,0.167 10 false SST

Using SST and a press, press out the counter drive gear from the transaxle.

SST
09950-60010  (09951-00600)
09950-70010  (09951-07100)


b.
D003602

As shown in the illustration, tighten the 2 bolts evenly and make a clearance of approximately. 20.0 mm (0.797 in.) between the counter drive gear and the inner race.


c.
D003603E06
2.188,0.813 2.656,1.156 2.656,1.156 2.146,1.563 false 1.885,1.438 2.656,1.156 false 2.698,1.073 3.021,1.229 0.323,0.156 10 false SST

Using SST, remove the tapered roller bearing.

SST
09950-60010  (09951-00600)
09950-40011  (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09958-04011)


d.
D003798

Using a brass bar and hammer, tap out the 2 counter drive gear bearing outer races from the transaxle.


Hide 35782D 70.REMOVE COUNTER DRIVE GEAR HOLE SNAP RING

a.
D003604

Using a screwdriver, pry out the snap ring from the transaxle.


Hide 35104C 71.REMOVE NO. 2 BREATHER PLUG

Hide 35882A 72.REMOVE DIFFERENTIAL GEAR LUBE APPLY TUBE

a.
D003607

Remove the bolt, the transaxle apply tube clamp and the differential gear lube apply tube from the transaxle.