Home › Drivetrain › U660E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AIR COOLED OIL COOLER
RM24M0E _52 Drivetrain _059579 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0292118 AIR COOLED OIL COOLER A

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  AIR COOLED OIL COOLER  INSTALLATION  


PROCEDURE

Hide 32920 1.INSTALL OIL WITH HOSE COOLER ASSEMBLY

a.
C206198

Install the transmission oil cooler air duct to the oil cooler assembly with the 4 bolts.

Torque:
4.9 N*m (50 kgf*cm, 43 in.*lbf)


b.
C207660

Install the lower oil cooler bracket to the oil cooler assembly with the bolt.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.
C158924

Install the upper oil cooler bracket to the oil cooler assembly with the 2 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


d.
C207659

Install the oil with hose cooler assembly with the 3 bolts.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


Hide 32941 2.INSTALL NO. 1 OIL COOLER INLET HOSE

a.
C160608E03
2.375,3.646 2.375,2.792 2.375,2.792 1.979,2.792 false 2.125,3.594 2.125,2.792 false 1.25,2.708 1.99,2.885 0.74,0.177 10 false Matchmark

Align the matchmarks and install the No. 1 oil cooler inlet hose to the oil with hose cooler assembly.


b.

Install the clip within the range shown in the illustration.


Hide 32942 3.INSTALL NO. 1 OIL COOLER OUTLET HOSE

a.
C160607E02
2.354,3.646 2.354,2.74 2.354,2.74 1.906,2.74 false 2.125,3.594 2.125,2.74 false 1.188,2.656 1.896,2.823 0.708,0.167 10 false Matchmark

Align the matchmarks and install the No. 1 oil cooler outlet hose to the oil with hose cooler assembly.


b.

Install the clip within the range shown in the illustration.


Hide 53806 5.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

a.
C158920

Install the front fender splash shield sub-assembly LH to the front bumper with the 3 screws and 2 clips.


Hide 53702 6.INSTALL FRONT FENDER APRON LH

Hide 51442 7.INSTALL NO. 2 ENGINE UNDER COVER

Hide 51441 8.INSTALL NO. 1 ENGINE UNDER COVER