Home › Drivetrain › U660E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AIR COOLED OIL COOLER
RM24M0E _52 Drivetrain _059579 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0292118 AIR COOLED OIL COOLER A

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  AIR COOLED OIL COOLER  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 51442 2.REMOVE NO. 2 ENGINE UNDER COVER

Hide 53702 3.REMOVE FRONT FENDER APRON LH

Hide 53806 4.SEPARATE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

a.
C158920

Remove the 3 screws and 2 clips and separate the front fender splash shield sub-assembly LH from the front bumper.


Hide 32942 6.SEPARATE NO. 1 OIL COOLER OUTLET HOSE

a.
C158922

Slide the clip and remove the No. 1 oil cooler outlet hose from the oil with hose cooler assembly.


Hide 32941 7.SEPARATE NO. 1 OIL COOLER INLET HOSE

a.
C158921

Slide the clip and remove the No. 1 oil cooler inlet hose from the oil with hose cooler assembly.


Hide 32920 8.REMOVE OIL WITH HOSE COOLER ASSEMBLY

a.
C207659

Remove the 3 bolts from the oil with hose cooler assembly.


b.
C158924

Remove the 2 bolts and upper oil cooler bracket from the oil cooler assembly.


c.
C207660

Remove the bolt and lower oil cooler bracket from the oil cooler assembly.


d.
C206198

Remove the 4 bolts and transmission oil cooler air duct from the oil cooler assembly.