Home › Suspension › SUSPENSION › REAR WHEEL ALIGNMENT › from 2016.05
RM24M0E _53 Suspension _059582 SUSPENSION _0292143 REAR WHEEL ALIGNMENT N

SUSPENSION  REAR WHEEL ALIGNMENT  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT TIRES

Hide 2.MEASURE VEHICLE HEIGHT

a.

Measure the vehicle height (see page Suspension>SUSPENSION>FRONT WHEEL ALIGNMENT>ADJUSTMENT).


Hide 3.INSPECT TOE-IN

U188218E02
0.281,0.042 0.417,0.188 0.135,0.146 10 false A 1.688,0.115 1.823,0.26 0.135,0.146 10 false D 3.083,0.052 3.219,0.198 0.135,0.146 10 false B 1.708,1.917 1.844,2.063 0.135,0.146 10 false C 1.51,0.51 1.875,0.677 0.365,0.167 10 false Front

Standard toe-in:
A + B C - D
0°17' +-22' (0.28° +-0.37°) 3.3 +-4.0 mm (0.13 +-0.16 in.)


If the toe-in is not within the specified range, inspect the suspension parts and replace them if necessary.


Hide 4.INSPECT CAMBER

a.

Install the camber-caster-kingpin gauge or set the vehicle on the wheel alignment tester.


b.

Inspect the camber.

Standard camber:
Item Specified Condition
Camber
Right-left error
-1°24' +-30' (-1.40° +-0.5°)
30' (0.5°) or less


HINT:

The camber is not adjustable. If the measurement is not within the specified range, inspect the suspension parts for damage and/or wear, and replace them if necessary.