Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
1.REMOVE FRONT WHEEL
89543
2.REMOVE FRONT SPEED SENSOR LH
48810
3.REMOVE FRONT STABILIZER LINK ASSEMBLY LH
48684B
4.REMOVE FRONT SUSPENSION SUPPORT DUST COVER LH
Using a screwdriver, remove the dust cover from the suspension support.
Tape the screwdriver tip before use.
5.REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING
Loosen the front support to front shock absorber nut.
Do not remove the front support to front shock absorber nut.
Loosen the front support to front shock absorber nut only when the front shock absorber with coil spring needs to be disassembled.
Remove the 2 bolts and 2 nuts, and disconnect the shock absorber from the steering knuckle.
While fixing the nuts in place, loosen and remove the bolts.
Remove the 3 nuts and shock absorber with coil spring.
48681B
6.REMOVE FRONT SUSPENSION SUPPORT GASKET LH