1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
16400
2.REMOVE RADIATOR ASSEMBLY WITH FAN SHROUD AND FAN MOTOR
16361A
3.REMOVE V-RIBBED BELT
88703
4.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
Disengage the clamp.
Disconnect the connector.
Remove the bolt and disconnect the discharge hose sub-assembly from the compressor.
Remove the O-ring from the discharge hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88712
5.DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose from the compressor.
Remove the O-ring from the cooler refrigerant suction hose.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88310D
6.REMOVE COMPRESSOR AND MAGNETIC CLUTCH
Disconnect the magnetic clutch connector.
Remove the 4 bolts.
Remove the wire harness bracket and compressor and magnetic clutch.