Home › Engine / Hybrid System › 2GR-FE COOLING › RADIATOR › 2013.04–2016.05
RM24M0E _51 Engine / Hybrid System _059551 2GR-FE COOLING _0291847 RADIATOR A

2GR-FE COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 28800J 5.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 17751 7.REMOVE NO. 1 AIR CLEANER INLET

a.
A162793

Remove the clip and inlet.


Hide 81175 10.REMOVE HEADLIGHT ASSEMBLY LH

Hide 81135 11.REMOVE HEADLIGHT ASSEMBLY RH

HINT:

Use the same procedures for the RH side and LH side.


Hide 53209B 12.REMOVE HOOD LOCK SUPPORT BRACE SUB-ASSEMBLY

a.
A217211

Disconnect the 3 wire harness clamps from the hood lock support brace sub-assembly.


b.
A217212

Remove the 2 bolts and hood lock support brace sub-assembly.


Hide 16533 13.REMOVE RADIATOR SUPPORT UPPER BRACKET

a.
A161428

Remove the 4 bolts and 2 brackets.


Hide 16712 14.REMOVE NO. 2 FAN SHROUD

a.
A161429

Remove the 2 bolts and No. 2 fan shroud.


Hide 16268 15.REMOVE NO. 1 WATER BY-PASS PIPE

a.

Detach the clamp from the radiator support.


b.

Disconnect the No. 1 water by-pass hose from the reservoir.


c.

Disconnect the No. 3 water by-pass hose from the radiator.


d.

Disconnect the No. 1 radiator hose from the radiator.


e.

Remove the 2 bolts and No. 1 water by-pass pipe from the upper radiator support.

A161447E01
1.388,0.524 3.094,0.698 1.707,0.174 10 No. 3 Water By-Pass Hose 5.353,0.089 7.060,0.263 1.707,0.174 10 No. 1 Water By-Pass Hose 4.762,3.078 6.476,3.252 1.714,0.174 10 No. 1 Water By-Pass Pipe 2.194,3.156 3.508,3.334 1.314,0.178 10 No. 1 Radiator Hose 1.318,1.453 1.191,0.589 1.191,0.589 1.356,0.589 false 5.274,0.421 5.219,0.158 5.219,0.158 5.324,0.158 false 2.842,2.472 2.842,3.129 false 3.953,0.618 4.547,3.143 4.547,3.143 4.724,3.143 false


Hide 89257 16.DISCONNECT COOLING FAN ECU CONNECTORS

a.
A161448

Disconnect the No. 1 and No. 2 cooling fan ECU connectors.


Hide 53205 17.REMOVE RADIATOR UPPER SUPPORT SUB-ASSEMBLY

a.
A114381

Remove the bolt securing the ground cable from the radiator support LH side.


b.

Detach the 2 wire harness clamps from the radiator support LH side.


c.
A161430

Remove the 4 bolts and support with wire harness.

NOTICE:

Do not move the radiator upper support excessively, as its movement is limited by the wire harness.



Hide 16571C 18.DISCONNECT NO. 1 RADIATOR HOSE

a.
A129777

Disconnect the No. 1 radiator hose from the radiator.


Hide 16572D 19.DISCONNECT NO. 2 RADIATOR HOSE

a.
A129815

Disconnect the No. 2 radiator hose from the radiator.


Hide 32921 20.DISCONNECT NO. 1 OIL COOLER INLET TUBE

a.

Disconnect the oil cooler hose inlet and outlet from the radiator.


b.

Remove the 3 bolts and tube from the radiator.

A162792


Hide 88711A 21.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

Hide 88716A 22.DISCONNECT COOLER REFRIGERANT LIQUID PIPE

Hide 88460 23.REMOVE COOLER CONDENSER ASSEMBLY

Hide 16400 24.REMOVE RADIATOR ASSEMBLY WITH FAN SHROUD AND FAN MOTOR

a.
A162791

Remove the radiator with fan shroud and fan motor.


b.

Remove the 2 lower radiator support cushions.


Hide 16711 25.REMOVE FAN SHROUD WITH FAN MOTOR

a.
A162790

Remove the 2 bolts and fan shroud with fan motor from the radiator.