1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
16361A
3.REMOVE FAN AND GENERATOR V BELT
88712
4.DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE
Remove the bolt and disconnect the cooler refrigerant suction hose from the cooler compressor.
Remove the O-ring from the cooler refrigerant suction hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88711
5.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE (w/ Bracket)
Remove the bolt and disconnect the cooler refrigerant discharge hose from the cooler compressor.
Remove the O-ring from the cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
Disconnect the connector.
Remove the cooler bracket.
88703
6.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE (w/o Bracket)
Remove the bolt and disconnect the cooler refrigerant discharge hose from the cooler compressor.
Remove the O-ring from the cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88320
7.REMOVE COOLER COMPRESSOR ASSEMBLY
Disconnect the connector.
Remove the 3 bolts, nut and cooler compressor.