CHECK DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester ON.
Select the following menu items: Body / Immobiliser / DTC.
Check DTCs and then write them down.
Refer to the intelligent tester operator's manual for further details.
Confirm the details of the DTCs (see page Vehicle Interior>ENGINE IMMOBILISER>ENGINE IMMOBILISER SYSTEM>DIAGNOSTIC TROUBLE CODE CHART).
CLEAR DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) (do not start the engine) and turn the intelligent tester ON.
Select the following menu items: Body / Immobiliser / DTC / Clear.
Refer to the intelligent tester operator's manual for further details.
Erase DTCs by pressing the YES button on the tester.
Refer to the intelligent tester operator's manual for further details.