Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059587 METER / GAUGE / DISPLAY _0292198 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  REMOVAL  


PROCEDURE

Hide 28800 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


Hide 55404C 2.REMOVE INSTRUMENT CLUSTER FINISH PANEL

Hide 83855 3.REMOVE NO. 1 COMBINATION METER BRACKET

E133570

a.

Remove the 3 screws and bracket.


Hide 83856 4.REMOVE NO. 2 COMBINATION METER BRACKET

E133571

a.

Remove the 3 screws and bracket.


Hide 83809 5.REMOVE COMBINATION METER SUB-ASSEMBLY

E133572E01
1.441,0.099 2.481,0.278 1.040,0.179 10 Protective Tape 0.61,1.067 1.309,0.196 1.309,0.196 1.384,0.196 false

a.

Apply protective tape under the instrument panel as shown in the illustration.


b.
E133573

Remove the 2 screws.


c.

Disconnect the connector.


d.
E358404

Lift up the combination meter in the direction of the arrow shown in the illustration, and detach the 2 clips.


e.

Rotate the combination meter into the upper instrument panel in the direction of arrow A.


f.

Pull out the left end of the combination meter in the direction of arrow B.


g.

Slide the combination meter in the direction of arrow C, and pull it out from the upper instrument panel.


h.

Slide the combination meter in the direction of arrow D, and remove the meter.

U189899E02
1.927,0.667 2.052,0.896 0.125,0.229 10 false A 0.76,5.208 0.885,5.438 0.125,0.229 10 false C 4.802,5.198 4.927,5.427 0.125,0.229 10 false D 4.49,1.896 4.615,2.125 0.125,0.229 10 false B