This DTC is stored when items controlled by the air conditioning amplifier assembly cannot be customized via the navigation system vehicle customization screen.
The air conditioning amplifier assembly controls the air conditioning system related items that are customizable via the multi-display screen.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15F5 | Air conditioning amplifier assembly vehicle setting processing error. | ·
CAN communication system ·
Air conditioning system ·
Air conditioning amplifier assembly ·
Navigation receiver assembly |
When replacing the navigation receiver assembly, perform vehicle contract setting (See page Audio / Visual / Telematics>G-BOOK>G-BOOK SYSTEM>REGISTRATION).
Use the intelligent tester to check if the CAN communication system is functioning normally (See page Power Source / Network>CAN COMMUNICATION>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
CAN communication DTCs are not output.
OK
NG
Check if the air conditioning system is malfunctioning (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the air conditioning system.
No malfunctions are present in the air conditioning system.
OK
NG
(See pageVehicle Interior>AIR CONDITIONING>AIR CONDITIONING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)
Display the "Climate settings" screen.
Using the intelligent tester, confirm that it is possible to change the settings of the air conditioning system related customize parameters that are shown as customizable via the multi-display screen.
The items available for customization via the multi-display screen can be customized successfully using the intelligent tester.
OK
NG