Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2016.05
RM24M0E _56 Audio / Visual / Telematics _059588 NAVIGATION / MULTI INFO DISPLAY _0292199 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  B15F7  Certification ECU Vehicle Information Reading/Writing Process Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the certification ECU cannot be customized via the navigation system vehicle customization screen.

HINT:

The certification ECU controls the smart entry and start system related items that are customizable via the multi-display screen.


DTC No. DTC Detection Condition Trouble Area
B15F7 Certification ECU vehicle setting processing error.
·

CAN communication system

·

Smart entry and start system

·

Certification ECU

·

Navigation receiver assembly



CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the navigation receiver assembly, perform vehicle contract setting (See page Audio / Visual / Telematics>G-BOOK>G-BOOK SYSTEM>REGISTRATION).

·

Before replacing the certification ECU, refer to the Service Bulletin.



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Use the intelligent tester to check if the CAN communication system is functioning normally (See page Power Source / Network>CAN COMMUNICATION>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).

OK:

CAN communication DTCs are not output.




OK

2.CHECK SMART ENTRY AND START SYSTEM

NG

2.CHECK SMART ENTRY AND START SYSTEM
a.

Check if the smart entry and start system is malfunctioning (See page Vehicle Interior>DOOR LOCK>SMART ENTRY AND START SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the smart entry and start system.


OK:

No malfunctions are present in the smart entry and start system.




OK

3.CHECK CUSTOMIZE ITEMS

NG

3.CHECK CUSTOMIZE ITEMS
a.

Display the "Door lock settings" screen.


b.

Using the intelligent tester, confirm that it is possible to change the settings of the customize parameters that are available for customization via the multi-display screen.

OK:

The items available for customization via the multi-display screen can be customized successfully using the intelligent tester.




OK

NG

REPLACE CERTIFICATION ECU