Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM › 2013.04–2016.05
RM24M0E _56 Audio / Visual / Telematics _059590 PARK ASSIST / MONITORING _0292203 PARKING ASSIST MONITOR SYSTEM C

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM  U0126  Lost Communication with Steering Angle Sensor Module  U0140  Lost Communication with Body Control Module  


DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the navigation receiver assembly.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.


DTC No. DTC Detection Condition Trouble Area
U0126 Lost communication with steering sensor CAN communication system
U0140 Lost communication with main body ECU (instrument panel junction block assembly)

PROCEDURE

1.CHECK DTC OUTPUT

b.

Check for DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>DTC CHECK / CLEAR).

Result:
Result Proceed to
DTCs are output A
No DTCs are output B



HINT:
·

If CAN communication system DTCs are stored, they may also be stored in other systems.

·

If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

·

If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs (See page General>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING).




A

B