GENERAL
When the vehicle is driven at 10 km/h (6 mph) or less, the ultrasonic sensors detect any obstacles at the corners and rear of the vehicle. The system then informs the driver of the distance between the sensors and the obstacles as well as their positions by indicating them on the clearance warning indicator and by sounding a buzzer.
FUNCTION OF COMPONENTS
| Components | Function |
|---|---|
| No. 1 ultrasonic sensor | No. 1 ultrasonic sensor consists of a sensor portion that transmits and receives ultrasonic waves and a pre-amplifier that amplifies the waves. The ultrasonic sensor outputs the ultrasonic transmission and reception signals to the clearance warning ECU assembly. |
| Clearance warning indicator assembly
(clearance sonar main switch) |
Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle. Turns the clearance sonar system on and off. |
| Buzzer in the clearance warning indicator assembly | Emits an intermittent sound to inform the driver that the ECU has detected an obstacle within prescribed ranges. |
| Clearance warning ECU assembly | Judges the approximate distance between the vehicle and the obstacle based on the signals from the ultrasonic sensors and sends the display signal to the clearance warning indicator and the buzzer signal to the buzzer. |
| Park/neutral position switch assembly | Sends a signal that activates the clearance sonar system when the shift lever is moved to the P or R position. |
OPERATION EXPLANATION
The clearance warning ECU assembly determines whether the clearance sonar system should be operated based on the clearance sonar main switch on/off status, the shift position and the vehicle speed.
When the system operates, the clearance warning ECU assembly transmits ultrasonic waves from the ultrasonic sensors. If these waves encounter an obstacle within one or more of the sensors' ranges, the waves are reflected back to the sensors, which transmit them to the clearance warning ECU assembly. Based on this information, the clearance warning ECU assembly sends signals to the clearance warning indicator and the buzzer. The approximate distance between the vehicle and the obstacle is then indicated, and the buzzer sounds.
Refer to Operation Check for the detailed operation (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>OPERATION CHECK).